2009-04-13

Batch 2.3: Clover Pollen Treat

After discovering that I'd apparently lost (can we go with misplaced?) the recipes and notes from the first three batches of beer that I'd brewed, I realized I should stop being an idiot and just post my notes here.

Duh.

So without further ado:



Batch #: 2.3
Brew Date: 2009-04-09
Type: Extract
Malt Extracts:
7lb Briess wheat-barley liquid malt extract
Malted Grains:
1lb Gambrinus Honey malt 25L
Hops:
1oz German Traditional (should have been: Hallertau) - 60 minutes
Yeast:
Wyeast 3086 Wheinstephan Wheat
OG: 1.050 at 70 F

Steeped the malted barley in 3 gallons of water at 165-155 F for 30 minutes, then sparged in remainder of boil water (2.5 gallons) at 170F. 1 tbsp Irish moss added. Otherwise totally straightforward.

4 oz of Clover honey pasteurized and added to primary at 24 hours.

This one looks like it'll come out properly, even though I managed to get a very violent (and over temperature) initial fermentation. I need better temperature control in my primary.

Edit: Kegged directly from primary on 2009-14-16 (7 days). FG: 1.012. Needs to settle and clear, but tastes pretty decent. Definitely going to go with Tettnang hops next time, and probably add the honey to the boil.

2009-01-13

Bitten by the home brewing bug


No, that's a stupid title. That title implies that I somehow 'discovered' the joys of brewing beer, or brewing beer in my kitchen, or that I've never seen or participated in the process of brewing beer before. I have. I've brewed my own small (11 gal) batches at this cool brew-your-own place in Ohio called Buckeye Brewing, but then the owner sold it, and I never went back, and then I moved... I've made wine at home, so I know what a carboy is, and an airlock, and how yeast converts sugar into alcohol in this miraculous process that, ultimately, ends up meaning so much to me.

I've always been into beer. Well, not always. I've been into beer since I discovered real beer, beer that had been brewed with taste - with the exquisite experience that accompanies the enjoyment of a true beer - rather than profit motive in mind.

Unlike, perhaps, some people, I can't pinpoint the exact time and place of this epiphany. There was in fact no real epiphany. I do remember the first time I had a beer good enough, remarkable enough to remember. It was the very late 90s or very early 00s, and one of my promoter friends had booked Paul Oakenfold to play at what was essentially a club night. One of the stipulations on Oakie's rider was that a chilled case of Hoegaarden be provided backstage for, one would assume, his exclusive consumption - perhaps to improve his beatmatching skills. Regardless of the intent, myself and another dude known only to me as 'DJ Kevin' proceeded to help ourselves to the contents of the case. Hey, they weren't drinking it. Oakenfolds set was done, and it hadn't been nearly as good as the beer. We finished the entire case between us, and the promoter glumly informed me that it had been a $48 case of beer.

I remember thinking, "Hey, that might actually be worth it."

I didn't suddenly cultivate a taste for Hoegaarden, though. I was far too poor, and kept drinking the same things I'd been drinking before: PBR and The Beast. Hey, if you're going to waste your money on domestic beer, you might as well not waste your money on their advertising campaigns as well. Budweiser is swill. Inoffensive, 'drinkable', and certainly consistent, but swill nonetheless. This is a commercial product mass-produced in vast quantities using the cheapest possible ingredients, in the least amount of time.

It is at the opposite end of the spectrum where the beer connoisseur inevitably finds themselves. As Budweiser is to McDonalds, so the craft brewery is to the individual restaurant, a singular creation of a single chef, each dish tailored to a unique taste. Or, one would hope.

Somewhere amid this glow of idealism lies the true state of craft beer in America. From pseudo-craft startups launched or taken over by major domestic breweries, to legitimate microbrewery success stories that sell millions of gallons of high-quality beer ever year, there's a lot to choose from. Some of it fantastic. Some of it rather awful. The rest lies between.

The thing is, nobody in the region (as in, no other micro-brewer) seems to share my particular taste in beer. I feel that there is a void that must be filled. I want things exactly my way. When has it ever been any different? Of course, for now, I have to content myself with research and design spending, and test marketing. Naturally.

2008-12-31

Logging off another user, remotely

So, for some reason someone left root logged in to the physical console on one of my Linux servers (Debian 4.0 on x86, if you must know), probably to see if the system was up after a power event. Well, of course it was up. I don't like root being logged into the physical console for obvious reasons, so in case I need it in the future, the appropriate incantation is:

# skill -KILL -t tty1

You're welcome.

2008-12-21

Snowy Sunday project: Heat molding my 32 Forecasts


Nothing to it.

A $40 heat gun, some cardboard tube, a thermocouple, an hour and a half, and three beers. I was going to take my boots to the nearest Zumiez today, and simply take the path of least resistance. I'm sure the heater that 32 gives it's distributors does a fantastic job of heating their liners. Unfortunately, I called them and their sales representative chirpily informed me that while they sold 32s they 'don't do heat molding', and none of their locations do heat molding, sorry. Which didn't seem plausible, but after saying 'Really?' and 'Are you sure?' in an incredulous voice a couple of times, I gave up. Hell, I have a heat source and a basic knowledge of thermodynamics. Who doesn't?

The key was ducting the hot air into the toe of the boot. I used a handy 1.5 inch cardboard tube that had a previous life as the center of a roll of wrapping paper. If you just blow heat into the top of the boot, you won't get good airflow through the liner, and the heat just stratifies in the top of the boot. You need to get the air down into the toe, and then it will heat the rest of the liner as it flows out of the boot. I heat soaked the liner at about 220F for 15 minutes. I cut a notch in the tube about 6 inches from the end so it would bend a little more gracefully.


Not the most elegant solution, but cardboard is a very poor conductor, and I wasn't worried about the tube singing the liner. Ultimately it worked very well.

I simply can't believe the level of fit I have now. I'll have to actually ride it, but it feels incredible. I could barely get my feet into the boots prior to treating them.

2008-12-11

Preview: Bridgestone Blizzak WS-60


Snow tires aren't exactly cheap. This set of 15 inchers ran just under $800 with shipping, wheels, and tire pressure sensors. Actually, only about $350 of that money went towards tires. So, they're somewhere in the realm beyond all-seasons and budget performance tires, and well below a serious performance tire.

The real question is: how much would you pay for traction? In my case, since I plan on making 50 or more trips into the Cascades this winter, I thought the expense was justified. You're not going to feel too proud of your thriftiness as you slide towards the guardrail on a snow-covered mountain pass.

I'll come back here and actually compare them to the Bridgestone Turanzas they replaced - hopefully after this weekend.

2008-12-08

Panorama: Playa Funchi, Bonaire


This was taken about a year and a half ago. I was just going through old pictures and noticed that I'd taken a panorama at this particular beach (playa). This beach is at the northernmost tip of the island of Bonaire, and is a part of the huge nature preserve there.

I've never seen such large parrotfish, anywhere.

2008-11-24

Text Message Spam: the Other White Meat


If you're a human, and you own a cellular handset, you've probably encountered text message spam. Text messaging is enabled on all plans by default, and virtually every provider runs an email to SMS gateway. So, in my case, with T-mobile, my phone can receive email at [my phone number]@tmomail.net. Spammers have to be salivating over this: compared to a standard dictionary attack on an email server (sending mail to every possible permutation of common names at a domain) this is much simpler. Call it a phone-book attack. A spammer can simply sequence through a given set of numbers in a known area code, or, to throw off reactive filters, a random set of numbers in an area code.

Unlike email, though, SMS messages generally cost the user of the handset, whether it's a fixed per-message charge, or a part of a monthly text message package. This, combined with the audible alert that comes with a handset text message, make this a particularly infuriating problem.

If you have T-Mobile, though, you're in luck. Just register your phone on their website to create a profile, if you haven't already. Once you're logged in, choose 'Send a text message' from the 'My Services' menu pull-down. On the right, you should see a link for 'Change my phone e-mail address'. Click that, then enter something unique and memorable as your new email address. Any further emails sent to the SMS gateway will have to use this address to reach your phone.

We'll see if this solves the problem for me, but it looks promising.